Peristaltic pump filling system with max flow 6 L/min per head



6000 ml/min per head

Related Application

GS600/KZ25 filling system ,with max flow 6 L/min for each head . suitable for medium flow filling .


Model GS600/KZ25 Display Mode 5 inch LCD screen
Speed Range 0.1-600 rpm Control Method Touch screen
Filling Accuracy <±0.5% External control start &stop
Flow Resolution 0.01ml Environment Temperature 0-40℃
Time resolution 0.1s Relatively Humidity <80%
filling volume range 0.001-9999.999ml Power consumption Each driver<50w
Filling time range 0.3-9999.99s Power supply AC220V or  AC110V
Pause Time range 0.3-9999.99s Motor Type Stepper motor
Suction Angle 0-360 ° IP Rating IP31

CR peristaltic pump filling system are based on bulk filling production requirment . which can meet production line with Conveyor belts, photoelectric switches, sensors, etc. 

*Accurate angle control technology for high precision filling.

*Color touch screen friendly interface dynamic displaying working state default parameters and system configuration at the same time.
*Intelligent calibration function.
*Online calibration function enables the intelligent calibration for the filling quantity before production. 
*Guarantee the filling precision and increase your working efficiency.
*Online fine tuning function convenient to calibrate or fine tuning the filling units during the productions to avoid any error in case the fatigue or elasticity decreased of the tubing.
*It is available for expanding the filling units from one controller freely.
*Can save 12 sets of common filling modes to save time and increase the work efficiency.
*Stop automatically once there was no container for the fluid to avoid any error during the operations.

Advantage of CR peristsaltic pump.
CR Peristaltic pump are easy to maintenance
replaceable tubes allow you to switch from one liquid to another in the shortest amount of time.
No need to rinse and disassemble after the flushable product, you only need to replace the peristaltic pump tubing
CR Peristaltic pump with high precisio
The calibration function can ensure the filling accuracy for each dose .The suckback function prevents liquid (reverse): in the dispense mode, after the end of the direct cycle, the return stroke is initiated to prevent the liquid from flowing out of the pump tube during the stop.
CR peristaltic pump are non-pollution: the fluid only contacts the pump tube and does not touch the pump body;
CR Peristaltic pump is Versatility
CR peristaltic pump can be used with a variety of products and can be used in a variety of industries.
CR peristasltic pump are easy to work
After the power is turned off and on, the control system maintains the current settings (pump head  tubing model and other parameter ).
CR peristaltic pump with good sealing: It has good self-priming ability and can be idling to prevent backflow.
CR peristaltic pump with Low shear: ideal for conveying shear sensitive, aggressive fluids

 For different customer’s requirement .now for the Ultra filling system GS600 series we have 2 programme .

Programme  Model Difference 1 Difference 2
Programme 1  T The same filling dose for multiple channels is only required to be set once in the touch screen panel
(eg   4 channels only need to set 1 time)
Different filling channels cannot set
different filling doses
Programme 2 Multiple channels of the same filling dose need to be set multiple times
(eg  4 channels need to be set 4 times)
Different filling channels can be set with different filling doses
(eg channel 1: 5ml /channel 2 :10ml /channel 3: 15ml/ channel 4: 20ml ....)


F is for different volume setting for each pump driver .
(different filling volume/filling time/pause time . copy number should set the same numbers ) .
Interface as below : 

   Model Guide :      
Model Dimension(mm) N. W
Flow range(ml/min)
For each head
Suitable tube model
GS600(4F)1*YZ1515x 916*316*198 18.5 0.1-600 0.007-2280 13# 14# 16# 19# 25# 17# 18#
GS600(4F)1*YZ2515x 916*316*198 18.5 0.1-600 0.17-1740 15# 24#
GS600(4F)1*KZ25 956*354*198 25 0.1-600 10-6000 15# 24# 35# 36#
GS600(4F)1*LP25-6 1120*389*198 32 0.1- 350 0.08-4500 2.4*2.4 3.6*2.4 15# 24# 35# 36#
GS600(4F)1*YZ35-13 1181*413*278 50 0.1-600 1.3-12000 73# 82#
T is for same volume setting for each pump driver .
(same filling volume/filling time/pause time/copy numbers )
Interface as below : 


T programme with same volume setting for each driver:

Model Dimension(mm) N. W
Flow range(ml/min)
For each head
Suitable tube model
GS600(4T)1*YZ1515x 916*316*198 18.5 0.1-600 0.007-2280 13# 14# 16# 19# 25# 17# 18#
GS600(4T)1*YZ2515x 916*316*198 18.5 0.1-600 0.17-1740 15# 24#
GS600(4T)1*KZ25 956*354*198 25 0.1-600 10-6000 15# 24# 35# 36#
GS600(4T)1*LP25-6 1120*389*198 32 0.1- 350 0.08-4500 2.4*2.4 3.6*2.4 15# 24# 35# 36#
GS600(4T)1*YZ35-13 1181*413*278 50 0.1-600 1.3-12000 73# 82#

Detailed explanation :
1, the drive specifications are distinguished by drivers
2, the number of drives defaults to 4.    2/3/5/6 Acceptable customization. (customization time about 10-20 work days )
3, T is for same volume setting for each driver . F is for different volume setting for each driver .
4,1* represents the number of pump heads per drive cascade, default is 1* (to ensure the accuracy of the filling, we suggest you to use 1 head in series.)
5, pump head model, according to the existing pump head model added.

Pump head introduction 

KZ25 pump heads are designed for middle flow rates, multi-channel fluids transfer. Easy to change and fix the tubing. Occlusion can be adjusted slightly. The rollers adopt 304sss materials. The pump head consists of base, rotor assembly and easily dismounted cartridge.
The pump head housing is available in PC, ABS or PPS. Suitable for a variety of medium flow liquid transfer and filling

Pump head Tube ID(mm) Wall thickness(mm) Speed(rpm) Flow rate(ml/min)
KZ25 15# 4.8 2.4 0.1-600 0.3-1800
24# 6.4 2.4 0.1-600 0.5-3000
35# 7.9 2.4 0.1-600 0.7-4200
36# 9.6 2.4 0.1-600 1-6000

CR pump's silicon tube is the most commonly used material for peristaltic pump.
It provides the longest service life, and good chemical compatibility with aqueous and many organic solvents.
Its service life is about 150 hrs at 600 rpm and 825 hrs at 100 rpm.
It can usually be left running on experiments during weekends without much danger of rupture.
A fresh section of tubing should be pulled through the pump rollers before any running peristaltic pump is left unattended.
Silicone tubing can also be autoclaved a single time with a wet cycle without a significant reduction in its life.
High temperature and high pressure sterilization.
CR peristaltic pump Ultra Filling system GS600 series with 5-inch industrial-grade true color LCD display and control. Smarter and more friendly. All working data can be easily set on the panel.
The peristaltic pump Ultra Fill system can store up to 12 filling settings data for different filling volumes.
Features :
With panel lock function to avoid erroneous operation.
With online fine-tuning, it quickly reduces fill errors.
With calibration function to ensure the high precision of the filling.
With full speed capability to quickly replenish and empty pipes.
With direction reversal, you can easily change direction.
It has a bottle-stopping function and can be used with the production line.
With external control function, it can be used together with the conveying sensor.
The peristaltic pump Ultra Filling system GS600 series also accepts custom program customization and channel number customization.

Peristaltic pumps are widely used in laboratories and scientific research institutions; chemical industry; construction industry; mining, metallurgy industry; paper industry; paint industry; food and beverage industry; ceramic industry; water treatment industry; biopharmaceutical industry; agricultural hydroponics industry; Equipment industry; industrial washing machine matching; packaging machinery industry, etc.
Practical application case
Research laboratory to do drop experiment, organic liquid timing quantitative transmission
Pharmaceutical industry : Pharmaceutical factory . Diagnostic reagent dispensing . machinery supporting for Filling machine / Dry granulation / Coating machine / Fermenter / Centrifuge, etc.
Food industry: filling machine/coffee machine/vending machine 
Cosmetics Industry: For filling Perfume/Essential Oils/Lotion/Mask/ nail polish etc. 
Construction industry: quantitative addition of water-based additives such as cement foaming agent/cement grinding aid/water reducing agent, small batch cement mortar transportation
Ceramic Industry Ceramic Ingredients / Slurry Transfer
Environmental protection: Flue gas analysis/Water quality monitoring/ COD/BOD etc.
Analytical Instruments: Atomic Fluorescence/Ion Chromatography/Liquid Chromatography /Biochemical Analyzer
Packaging, protection:sealing and gelatinize machine, For adding glass fiber antistatic agent/ Wire coating/mechanical parts oiling .etc. 
?Mining and Metallurgy : Precious Metal Flotation / Metallurgy Quantitative Additives /Gem Cutting Fluid Quantitative Addition /Polishing Fluid Delivery
Chemical synthesis: Glass reactor additive /Electroplating dosing /PH value control
Medical: Intestinal cleaning (endoscope matching) /Washing machine matching/ Liposuction surgery (for swelling anesthesia)
Cleaning: Washing machine Dishwasher (delivering detergent, etc.)  etc.
Agriculture: fertilizer addition  Dosing of animal feed additives

*If you encounter any CR pump product quality issues, please contact us in time.
*CR pump guarantee 7*24 hour online.
*CR pump products with one year warranty and lifetime maintenance.
*The product pictures and models, data, functions, performance, specifications and other parameters of this website are for reference only. CR pump may improve the above contents. For details, please refer to the product and product manual. Unless otherwise stated, the data contained in this website are CR pump internal test results, and the comparisons are compared with the CR pump products.

Sounds great but ,I have some questions ,Contact us now !

All rights reserved Baoding Chuangrui Precision Pump Co.,Ltd.
Address:2 Floors, East Unit, Building 12, ZOL Innovation Base, Huiyang street, Baoding, Hebei, China.