Technical Parameter:
Peristaltic pump for Polycarboxylate Superplasticizer
Peristaltic pump for Polycarboxylate Superplasticizer
Polycarboxylate Superplasticizer is a high performance water reducer and a cement dispersant for cement concrete applications. Widely used in highways, bridges, dams, tunnels, high-rise buildings, etc.
Peristaltic pumps are also used in a wide variety of industrial applications. Their unique design makes them especially suited to pumping abrasives and viscous fluids. ------WIKI
peristaltic dosing pumps - BT600M
Peristaltic pumps are typically used to pump clean/sterile or aggressive fluids without exposing those fluids to contamination from exposed pump components. Some common applications include pumping IV fluids through an infusion device, apheresis, aggressive chemicals, high solids slurries and other materials where isolation of the product from the environment, and the environment from the product, are critical. It is also used in heart-lung machines to circulate blood during a bypass surgery, and in hemodialysis systems, as the pump does not cause significant hemolysis.Peristaltic pumps are also used in a wide variety of industrial applications. Their unique design makes them especially suited to pumping abrasives and viscous fluids. ------WIKI
Flowrate is0.007~2280ml/min. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers. FULL SPEED button available for filling in & emptying out. Good capability price rate. Not suitable when used in the open air.
Model: BT600M
Flow rate: 0.007-2280ml/min
Display mode: 4-LED display double mode( flow rate and speed)
Speed adjust mode: Membrane Keyboard adjust speed
Power consumption: ＜50W
Weight: 4.7KG
Control method: Knob
IP rating: IP31
Speed: 0.1-600rpm
Speed resolution: 0.1rpm
Flow accuracy: ≤±0.5%
Power supply: AC220V±10%（standard） or AC110V ±10%（optional）
External Control: Start & stop, direction control, speed control( Analog control :0-5v, 0-10v, 4-20mA option )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol
Work Environment: Temperature 0-40℃, ＜80% relative humidity, no condensation
Share:
