before opening is the need to prepare the work, the preparatory work is often peristaltic pump operators ignored, so that they open peristaltic pump busy with production, or open before the inspection work is not in place, in the open peristaltic pump failure. These small problems can actually be avoided. Be sure to prepare and check before the peristaltic pump is turned on.
In the purchase of peristaltic pump
equipment after the customer is concerned about the relevant technical information and production process with the master, easy for customers to use the equipment for the first time in order to extend the life of the boot debugging equipment, peristaltic pump for customers to minimize production costs to bring additional production efficiency.
After the installation of the equipment is stable, it is necessary to check all the lubrication points of the peristaltic pump
equipment and fill the gear oil to ensure the smooth operation of the equipment. Secondly, before turning on the main control box power supply and install the standard security wiring, then do not rush to boot, you can start three to five minutes of silence, to see if there are a card, touch, and other anomalies, if not, you can normally put into production use, once the above situation, the need to immediately shut down for inspection,