How to install a peristaltic pump

Keywords: peristaltic pump
2018-06-22 11:47
A simple peristaltic pump consists of three parts: actuator, pump head and pump tube.The three parts are installed as a peristaltic pump that can be used after power is applied.Let's take BT600FC as an example to explain how to install a peristaltic pump.
Installing Peristaltic Pump Steps
First, you need to prepare the driver, pump head (one or more), pump head screw, and pump tubing.

Installing Peristaltic Pump Steps2

Installing Peristaltic Pump Steps3
Then connect the two pump heads together according to the design of the lock. It should be noted that the bearings of the center must be tightly connected so as to reduce the error between the pump heads.

Installing Peristaltic Pump Steps4


Installing Peristaltic Pump Steps5
Connect the pump head in series with the coupling of the driver.

Installing Peristaltic Pump Steps6
Fix the pump head in series with the pump head screw

Installing Peristaltic Pump Steps 7



Push the pump head lever and put the pump tube into the pump head
Installing Peristaltic Pump Steps 8
Stretch the pump tube left and right to confirm that the pump tube is installed on the pump head wheel


Installing Peristaltic Pump Steps 9


Pull back the pump head lever and the peristaltic pump is installed.

Installing Peristaltic Pump Steps



Related Products

  CR Alibaba      CR AliExpress   

All rights reserved Baoding Chuangrui Precision Pump Co.,Ltd
Address:2 Floors, East Unit, Building 12, ZOL Innovation Base, Huiyang street, Baoding, Hebei, China

Skype: ella-crpump QQ: 507183200