Digital peristaltic pump - BT300M

This product can be installed by YZ1515x,YZ2515x,, with flow rate from 0.007-1140mL/min. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers.

Technical Parameter:

Model: BT300M

Flow rate: 0.007-1140ml/min

Display mode: 4-LED display double mode( flow rate and speed)

Speed adjust mode: Membrane Keyboard adjust speed

Power consumption: ＜35W

Weight: 4.12KG

Control method: Knob

IP rating: IP31

Speed: 0.1-300rpm

Speed resolution: 0.1rpm

Flow accuracy: ≤±0.5%

Power supply: AC220V±10%（standard） or AC110V ±10%（optional）

External Control: Start & stop, direction control, speed control( Analog control :0-5v, 0-10v, 4-20mA option )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol

Work Environment: Temperature 0-40℃, ＜80% relative humidity, no condensation

Dimension Drawing:
234*154*144(mm)

Operation Panel:

Video:

Pump head:

YZ1515x

YZ2515x

Silicone tube parameter:

BT300M/YZ1515x(0.007-1140ml/min)

Tube	ID(mm)	Wall thickness(mm)	OD(mm)	Speed(rpm)	Flow rate(ml/min)
13#	0.8	1.6	4	0.1-300	0.007-21
14#	1.6	1.6	4.8	0.1-300	0.027-81
19#	2.4	1.6	5.6	0.1-300	0.051-153
16#	3.1	1.6	6.3	0.1-300	0.082-246
25#	4.8	1.6	8	0.1-300	0.17-510
17#	6.4	1.6	9.6	0.1-300	0.29-870
18#	7.9	1.6	11.1	0.1-300	0.38-1140

BT300M/YZ2515x(0.17-870ml/min)

Tube	ID(mm)	Wall thickness(mm)	OD(mm)	Speed(rpm)	Flow rate(ml/min)
15#	4.8	2.4	9.6	0.1-300	0.17-510
24#	6.4	2.4	11.2	0.1-300	0.29-870

CR pump's silicon tube is the most commonly used material for peristaltic pump.
It provides the longest service life, and good chemical compatibility with aqueous and many organic solvents.
Its service life is about 150 hrs at 600 rpm and 825 hrs at 100 rpm.
It can usually be left running on experiments during weekends without much danger of rupture.
A fresh section of tubing should be pulled through the pump rollers before any running peristaltic pump is left unattended.
Silicone tubing can also be autoclaved a single time with a wet cycle without a significant reduction in its life.
High temperature and high pressure sterilization.

Function & characteristics:

1. Applicable pump heads: YZ1515x,YZ2515x.

2. Two ways of changing flow speeds: by hand through switching knobs/ automatic control through external controller interface.

3. Switching knobs excel membrane keypad in reducing failure rates during the operation.

4. FULL SPEED button available for filling in & emptying out.

5. Memory function available in case of power off.

6. Good capability price rate.

7. Not suitable when used in the open air.

Application:

1. Accurate measurement and ration feedstock, it could reach highest precision

2. Transfer viscous liquid

3. In food and medical care via changing the tube and material