Intelligent Peristaltic Pump

intelligent control BT100LC

Flowrate

0.007-290ml/min

Application

Circulation of cell suspension in fermentation
Nutrient supply for cultures
Sterilised media dispensing
Ultra filtration
Circuit board manufacturing
Vitamin A & D injection
water treatment
Mining flotation

Note

Intelligent Peristaltic Pump

Related Application

Intelligent Peristaltic Pump  -  BT100LC

1. This product can be installed by YZ1515x, YZ2515x, DG series pump heads.etc..
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate, 
4. 3.5 -inch color LCD display in English,Russia,Brazil and Chinese version, touch screen control.
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.


Technical Parameter:

Model: BT100LC


Flow rate: 0.0015-380ml/min


Display mode: LCD screen


Speed control method: Touch screen control


​​​​Power consumption: <22W


Dispensing number: 0~9999t


Dispensing time: 0.1s~9999min


Interval time: 0.1s~9999min


Back Suction angle: 10°~720° (1° Stepping)


Speed: 0.1-100rpm


Speed resolution: 0.1rpm


Flow accuracy: ≤±0.5%


Power supply: AC220V±10%(standard) or AC110V ±10%(optional)


External Control: Start & stop, direction control, speed control( Analog control :0-5v, 0-10v, 4-20mA option )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol


Work Environment: Temperature  0-40℃, <80% relative humidity, no condensation


IP rating: IP31 



Dimension Drawing:
212*135*240(mm)


Operation Panel:

​​


 

Pump head:

YZ1515x

YZ2515x

DG series


Silicone tube parameter:

BT100LC/YZ1515x(0.007-380ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
13# 0.8 1.6 4 0.1-100 0.007-7
14#​​​​ 1.6 1.6 4.8 0.1-100 0.027-27
19# 2.4 1.6 5.6 0.1-100 0.051-51
16# 3.1 1.6 6.3 0.1-100 0.082-82
25#  4.8 1.6 8 0.1-100 0.17-170
17# 6.4 1.6 9.6 0.1-100 0.29-290
18# 7.9 1.6 11.1 0.1-100 0.38-380

BT100LC/YZ2515x(0.17-290ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
15# 4.8 2.4 9.6 0.1-100 0.17-710
24#​​​​ 6.4 2.4 11.2 0.1-100 0.29-290

DG1-12/6 rollers(0.002- 36.6ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
0.5*0.8 0.5 0.8 2.4 0.1-100 0.002-2
1*1​​​​ 1 1 3 0.1-100 0.006-6
2*1 2 1 4 0.1-100 0.019-19
2.4*0.8 2.4 0.8 4 0.1-100 0.0245-24.5
3*1  3 1 5 0.1-100 0.0366-36.6

DG1-12/10 rollers(0.0015- 17.8ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
0.5*0.8 0.5 0.8 2.4 0.1-100 0.0015-1.5
1*1​​​​ 1 1 3 0.1-100 0.004-4
2*1 2 1 4 0.1-100 0.013-13
2.4*0.8 2.4 0.8 4 0.1-100 0.0178-17.8
3*1  3 1 5 0.1-100 0.0178-17.8

CR pump's silicon tube is the most commonly used material for peristaltic pump.
It provides the longest service life, and good chemical compatibility with aqueous and many organic solvents.
Its service life is about 150 hrs at 600 rpm and 825 hrs at 100 rpm.
It can usually be left running on experiments during weekends without much danger of rupture.
A fresh section of tubing should be pulled through the pump rollers before any running peristaltic pump is left unattended.
Silicone tubing can also be autoclaved a single time with a wet cycle without a significant reduction in its life.
High temperature and high pressure sterilization.

Function & characteristics:
LCD screen display

​​​​​​1. Memory function available in case of power off and it will continue the work once the power was restarted.

2. Long-range control is available through the DB15 interface of the drive: speed control, start-stop control, direction control.

3. Good cost performance.

Control

​​​​​​1. Has the flow calibration function, suitable for higher precision transmission fluid.

2. A variety of work modes: transfer mode, timing model and quantitative model, timing quantitative model.

3. The user data storage function: can store 9 sets of data for the user.

4. Memory function available in case of power off

Application:

1. Circulation of cell suspension in fermentation

2. Nutrient supply for cultures 

3. Sterilised media dispensing

4. Ultra filtration

5. Circuit board manufacturing

6. Vitamin A & D injection

7. Metal surface treatment and coating process

8. Mining flotation

​​​​9. Solution liquid,oil ink,adhesive transmission

  CR Alibaba      CR AliExpress   

All rights reserved Baoding Chuangrui Precision Pump Co.,Ltd
Address:2 Floors, East Unit, Building 12, ZOL Innovation Base, Huiyang street, Baoding, Hebei, China

Skype: ella-crpump QQ: 507183200