This product can be installed by DG SERIES pump heads, with flow rate from 0.007-30mL/min. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers.
1.applicable pump heads: DG-1 DG-2DG-4/DG-6/DG-8/DG-12
2.two ways of changing flow speeds: by hand through switching knobs/ automatic control through external controller interface
3.switching knobs excel membrane keypad in reducing failure rates during the operation
4.FULL SPEED button available for filling in & emptying out
5.Memory function available in case of power off
6.Good capability price rate
7.not suitable when used in the open air
Typical application:
1.accurate measurement and ration feedstock, it could reach highest precision
2.transfer viscous liquid
3.in food and medical care聽 via changing the tube and material
Speed |
0.1 to 100 rpm, reversible |
Speed precision |
0.1rpm |
Speed control |
Rotary encoded switch / full speed |
Display |
4-digit LED displays current rpm |
Analog interface |
Start/stop and cw/ccw control,0 to 5 V, 0 to 10 V, and 4 to 20 mA speed control,RS485bus |
Power supply |
AC 90V-260V 50Hz/60Hz |
Power consumption |
<22W |
Operating condition |
Temperature 0 to 40°C, relative humidity < 80% |
Dimensions (L × W × H) |
in food and medical care via changing the tube and material |
Weight |
3.98Kg |
IP rating |
IP31 |
Drive |
Pump heads |
Tubing |
Flow rates (mL/min) |
OEM312-BJ100/DG-4 |
DG-N(6 rollers) |
0.5×0.81×1 |
0.006~30 per channe |
DG-N(10 rollers) |
2×12.4×0.8 |
0.005~20 per channe |
3-digit LED