1. CR smart filling Peristaltic pump can work with LP25-6 pump heads
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. 3.5 -inch color LCD display in Englishand Chinese version, touch screen +keypad control.
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.
Parameter
|
Model |
BT600FC/LP25-6 |
Display Mode |
LCD screen |
|
Speed Range |
0.1-350 rpm |
Control Method |
Touch screen + keypad |
|
speed resolution |
0.1 rpm |
Environment Temperature |
0-40℃ |
|
Max Flow |
4000ml/min |
Relatively Humidity |
＜80% |
|
Filling Accuracy |
＜±0.5% |
Power consumption |
＜50w |
|
Filling volume range |
0.01-9999ml |
Power supply |
AC220V or AC110V |
|
Filling time range |
0.3-9999s |
Motor Type |
Stepper motor |
|
Pause Time range |
0.1s~9999min |
External control
Start & stop, direction control, speed control( Analog control :0-5v, 0-10v, 4-20mA optionl )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol |
|
copy number range |
0~9999t |
|
Filling numbers |
0~9999t |
|
Suckback angle |
10°~720° (1° Stepping) |
Advantage of CR peristsaltic pump.
CR Peristaltic pump are easy to maintenance
replaceable tubes allow you to switch from one liquid to another in the shortest amount of time.
No need to rinse and disassemble after the flushable product, you only need to replace the peristaltic pump tubing
CR Peristaltic pump with high precision
The calibration function can ensure the filling accuracy for each dose .The suckback function prevents liquid (reverse): in the dispense mode, after the end of the direct cycle, the return stroke is initiated to prevent the liquid from flowing out of the pump tube during the stop.
CR peristaltic pump are non-pollution: the fluid only contacts the pump tube and does not touch the pump body;
CR Peristaltic pump is Versatility
CR peristaltic pump can be used with a variety of products and can be used in a variety of industries.
CR peristasltic pump are easy to work
After the power is turned off and on, the control system maintains the current settings (pump head tubing model and other parameter ).
CR peristaltic pump with good sealing: It has good self-priming ability and can be idling to prevent backflow.
CR peristaltic pump with Low shear: ideal for conveying shear sensitive, aggressive fluids
LP25-6 easy load peristaltic pump head is our company aims at filling requirements of high precision users and on the basis of the original equipment to newly developed production . a kind of low pulsation and high precision special peristaltic pump head after widely soliciting the views of users. It is suitable for high precision and medium flow filling.
The pump head is of all metal structure, high mechanical strength and the shape adopts streamlined design, sturdy and beautiful, and easy to install. The two group of 304 stainless steel roller design with phase difference complementary can make fluid peaks and troughs complement each other to effectively reduce the fluctuation of the fluid and can be installed with double “Y” hose. And the flow and hose pressure is higher than the ordinary pump head.
The pump head adopts the humanized design that the pressure can be adjusted fine, which ensures the transmission and filling accuracy of the fluid more effectively.
The pump head shell adopts Aluminum Alloy material, anodized treatment, fine workmanship and it have the advantages of light weight, small vibration, low noise, good stability, waterproof, dust proof, anti-corrosion, high temperature resistance and long service life. This greatly reduces maintenance and repair costs in routine
|
pump head |
tube model |
ID*OD(mm) |
max speed (rpm) |
Max Flow (ml/min ) |
|
LP25-6 |
2.4*2.4 |
2.4*7.2 |
350 |
420 |
|
3.2*2.4 |
3.2*8 |
350 |
720 |
|
15# |
4.8*9.6 |
350 |
1680 |
|
24# |
6.4*11.2 |
350 |
2650 |
|
35# |
7.9*12.7 |
350 |
3300 |
|
36# |
9.6*14.4 |
350 |
4000 |
For the filling volume below 2 ml . we suggest the tube 2.4*2.4
For the filling volume between 2- 5ml .we suggest the tube 3.2*2.4
For the filling volume between 5- 20ml , we suggest the tube 15#
For the filling volume between 20-50 ml .we suggest the tube 24#
For the filling volume between 50-100 ml ,we suggest the tube 35#
For the filling volume between 100-500 ml. we suggest the tube 36#
Noted : This recommendation is for reference only, and the actual delivery configuration is subject to the recommendation of the salesperson.
CR peristaltic pump tubing is the most commonly used material for peristaltic pump.
It provides the longest service life, and good chemical compatibility with aqueous and many organic solvents.
Its service life is about 150 hrs at 600 rpm and 825 hrs at 100 rpm.
It can usually be left running on experiments during weekends without much danger of rupture.
A fresh section of tubing should be pulled through the pump rollers before any running peristaltic pump is left unattended.
Silicone tubing can also be autoclaved a single time with a wet cycle without a significant reduction in its life.
High temperature and high pressure sterilization.
Function & characteristics:
Best Choice for vial filling.
human-pump interactive interface.
CR smart filling peristaltic pump is the best Choice for vial filling .
With Calibration function that can ensure the filling accuracy .
Can save 9 sets data that can help customer fastly find the original filling data .
Support RS485/RS232/MODBUS communication protocol , analog quantity control (0-5v 0-10v 4-20mA ...)foot switch control ,Offer multi Language customized .
Memory function available in case of power off and it will continue the work once the power was restarted.
Long-range control is available through the DB15 interface of the drive: speed control, start-stop control, direction control
A variety of work modes: transfer mode, filling model.
The user data storage function: can store 9 sets of data for the user.
Peristaltic pumps are widely used in laboratories and scientific research institutions; chemical industry; construction industry; mining, metallurgy industry; paper industry; paint industry; food and beverage industry; ceramic industry; water treatment industry; biopharmaceutical industry; agricultural hydroponics industry; Equipment industry; industrial washing machine matching; packaging machinery industry, etc.
Practical application case
Research laboratory to do drop experiment, organic liquid timing quantitative transmission
Pharmaceutical industry : Pharmaceutical factory . Diagnostic reagent dispensing . machinery supporting for Filling machine / Dry granulation / Coating machine / Fermenter / Centrifuge, etc.
Food industry: filling machine/coffee machine/vending machine
Cosmetics Industry: For filling Perfume/Essential Oils/Lotion/Mask/ nail polish etc.
Construction industry: quantitative addition of water-based additives such as cement foaming agent/cement grinding aid/water reducing agent, small batch cement mortar transportation
Ceramic Industry Ceramic Ingredients / Slurry Transfer
Environmental protection: Flue gas analysis/Water quality monitoring/ COD/BOD etc.
Analytical Instruments: Atomic Fluorescence/Ion Chromatography/Liquid Chromatography /Biochemical Analyzer
Packaging, protection:sealing and gelatinize machine, For adding glass fiber antistatic agent/ Wire coating/mechanical parts oiling .etc.
Mining and Metallurgy : Precious Metal Flotation / Metallurgy Quantitative Additives /Gem Cutting Fluid Quantitative Addition /Polishing Fluid Delivery
Chemical synthesis: Glass reactor additive /Electroplating dosing /PH value control
Medical: Intestinal cleaning (endoscope matching) /Washing machine matching/ Liposuction surgery (for swelling anesthesia)
Cleaning: Washing machine Dishwasher (delivering detergent, etc.) etc.
Agriculture: fertilizer addition Dosing of animal feed additives
