Intelligent micro liquid Dispensing Peristaltic Pump - BT100FC

1. This product can be installed by YZ1515x, YZ2515x, DG series pump heads.etc..
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. 3.5 -inch color LCD display in English,Russia,Brazil and Chinese version, touch screen control.
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.

Technical Parameter:

Model: BT100FC

Flow rate: 0.0015-380ml/min

Display mode: LCD screen

Speed control method: Touch screen control

Power consumption: ＜22W

Dispensing number: 0~9999t

Dispensing time: 0.1s~9999min

Interval time: 0.1s~9999min

Back Suction angle: 10°~720° (1° Stepping)

Speed: 0.1-100rpm

Speed resolution: 0.1rpm

Flow accuracy: ≤±0.5%

Power supply: AC220V±10%（standard） or AC110V ±10%（optional）

External Control: Start & stop, direction control, speed control( Analog control :0-5v, 0-10v, 4-20mA option )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol

Work Environment: Temperature 0-40℃, ＜80% relative humidity, no condensation

IP rating: IP31

Dimension Drawing:
212*135*240(mm)

Operation Panel:

Video:

Pump head:

YZ1515x

YZ2515x

DG series

Silicone tube parameter:

BT100FC/YZ1515x(0.007-380ml/min)

Tube	ID(mm)	Wall thickness(mm)	OD(mm)	Speed(rpm)	Flow rate(ml/min)
13#	0.8	1.6	4	0.1-100	0.007-7
14#	1.6	1.6	4.8	0.1-100	0.027-27
19#	2.4	1.6	5.6	0.1-100	0.051-51
16#	3.1	1.6	6.3	0.1-100	0.082-82
25#	4.8	1.6	8	0.1-100	0.17-170
17#	6.4	1.6	9.6	0.1-100	0.29-290
18#	7.9	1.6	11.1	0.1-100	0.38-380

BT100FC/YZ2515x(0.17-290ml/min)

Tube	ID(mm)	Wall thickness(mm)	OD(mm)	Speed(rpm)	Flow rate(ml/min)
15#	4.8	2.4	9.6	0.1-100	0.17-710
24#	6.4	2.4	11.2	0.1-100	0.29-290

DG1-12/6 rollers(0.002-36.6ml/min)

Tube	ID(mm)	Wall thickness(mm)	OD(mm)	Speed(rpm)	Flow rate(ml/min)
0.5*0.8	0.5	0.8	2.4	0.1-100	0.002-2
1*1	1	1	3	0.1-100	0.006-6
2*1	2	1	4	0.1-100	0.019-19
2.4*0.8	2.4	0.8	4	0.1-100	0.0245-24.5
3*1	3	1	5	0.1-100	0.0366-36.6

DG1-12/10 rollers(0.0015-17.8ml/min)

Tube	ID(mm)	Wall thickness(mm)	OD(mm)	Speed(rpm)	Flow rate(ml/min)
0.5*0.8	0.5	0.8	2.4	0.1-100	0.0015-1.5
1*1	1	1	3	0.1-100	0.004-4
2*1	2	1	4	0.1-100	0.013-13
2.4*0.8	2.4	0.8	4	0.1-100	0.0178-17.8
3*1	3	1	5	0.1-100	0.0178-17.8

CR pump's silicon tube is the most commonly used material for peristaltic pump.
It provides the longest service life, and good chemical compatibility with aqueous and many organic solvents.
Its service life is about 150 hrs at 600 rpm and 825 hrs at 100 rpm.
It can usually be left running on experiments during weekends without much danger of rupture.
A fresh section of tubing should be pulled through the pump rollers before any running peristaltic pump is left unattended.
Silicone tubing can also be autoclaved a single time with a wet cycle without a significant reduction in its life.
High temperature and high pressure sterilization.

Function & characteristics:

LCD screen display

1. Memory function available in case of power off and it will continue the work once the power was restarted.

2. Long-range control is available through the DB15 interface of the drive: speed control, start-stop control, direction control.

3. Good cost performance.

Control

1. Has the flow calibration function, suitable for higher precision transmission fluid.

2. A variety of work modes: transfer mode, timing model and quantitative model, timing quantitative model.

3. The user data storage function: can store 9 sets of data for the user.

4. Memory function available in case of power off

Application:

1. Culture medium Filling

2. Coffee additive Filling

3. E-liquid/nail polish/Glycerin filling

4. Coloring agent for seasoning product filling

5. Diagnostic reagent filling

6. Packing machine industrial