Digital Dispensing peristaltic dosing pumps

BT600FJ

Flowrate

0.007-2280ml/min

Application

transfer, Lab, food canning, liquid canning

Note

Speed: 0.1-600rpm

Digital Dispensing peristaltic dosing pumps  -  BT600FJ

The simple design provides economical choice for you, that guarantees the quality and saves the cost at the same time.Two kinds of operating modes, transferring and dispensing, may achieve the transfer function as the basic type peristaltic pump, and also achieve the dispensing function as the dispensing type peristaltic pump. 
Needn’t purchase the time distributor in addition, reducing the accessories and saving the cost. 
Install external control module free to achieve start stop of external control, and coordinate with filling machine to work. 
Widely used in multichannel transfer fluid in batch.


Technical Parameter:

Model: BT600FJ


Flow rate: 0.007-2280ml/min


Display mode: 4-digital LED display current rotating speed and dispensing frequency


Speed Control Method: Digital rotary knob to adjust the speed


​​​​Power consumption: <50W


Dispensing number: 0~9999t


Dispensing time: 0.1s~9999min


Interval time: 0.1s~9999min


Back Suction angle: 10°~720° (1° Stepping)


Speed: 0.1-600rpm


Speed resolution: 0.1rpm


Flow accuracy: ≤±0.5%


Power supply: AC220V±10%(standard) or AC110V ±10%(optional)


External Control: Start & stop, direction control, speed control( Analog control :0-5v, 0-10v, 4-20mA option )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol


Work Environment: Temperature  0-40℃, <80% relative humidity, no condensation


​​​​​IP rating: IP31 


Weight: 4.8KG



Dimension Drawing:
254*184*150(mm)


Operation Panel:

​​


Video:

 

 

Pump head:

YZ1515x

YZ2515x

 


Silicone tube parameter:

BT600FJ/YZ1515x(0.007-2280ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
13# 0.8 1.6 4 0.1-600 0.007-42
14#​​​​ 1.6 1.6 4.8 0.1-600 0.027-162
19# 2.4 1.6 5.6 0.1-600 0.051-306
16# 3.1 1.6 6.3 0.1-600 0.082-492
25#  4.8 1.6 8 0.1-600 0.17-1020
17# 6.4 1.6 9.6 0.1-600 0.29-1740
18# 7.9 1.6 11.1 0.1-600 0.38-2280

BT600FJ/YZ2515x(0.17-1740ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
15# 4.8 2.4 9.6 0.1-600 0.17-1020
24#​​​​ 6.4 2.4 11.2 0.1-600 0.29-1740

CR pump's silicon tube is the most commonly used material for peristaltic pump.
It provides the longest service life, and good chemical compatibility with aqueous and many organic solvents.
Its service life is about 150 hrs at 600 rpm and 825 hrs at 100 rpm.
It can usually be left running on experiments during weekends without much danger of rupture.
A fresh section of tubing should be pulled through the pump rollers before any running peristaltic pump is left unattended.
Silicone tubing can also be autoclaved a single time with a wet cycle without a significant reduction in its life.
High temperature and high pressure sterilization.

Function & characteristics:
4-led display

​​​​​​1. Memory function available in case of power off and it will continue the work once the power was restarted.

2. Long-range control is available through the DB15 interface of the drive: speed control, start-stop control, direction control.

3. Good cost performance.

Control

​​​​​​1. Two ways of changing flow speeds: by hand through switching knobs/ automatic control through external controller interface

2. Switching knobs excel membrane keypad in reducing failure rates during the operation

3. FULL SPEED button available for filling in & emptying out

4. Memory function available in case of power off

5. Good capability price rate.

6. Not suitable when used in the open air.

7. Applicable pump heads: YZ1515x, YZ2515x.

Application:

1. Transfer of fuels and lubricants

2. Spray coating dispensing


3. Adhesives for cement

4. Dispensing the cell culture medium

5. e liquid filling

6. liquid drug dispensing

7. nail polish distribution

8. Filtration of cell culture fluid.

  CR Alibaba      CR AliExpress   

All rights reserved Baoding Chuangrui Precision Pump Co.,Ltd
Address:2 Floors, East Unit, Building 12, ZOL Innovation Base, Huiyang street, Baoding, Hebei, China

Skype: ella-crpump QQ: 507183200