dispensing/filling peristaltic dosing pumps - BT600FC

1. This product can be installed by YZ1515x, YZ2515x, DG series pump heads.etc..
2. With both-way large torque, low power stepper motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. 3.5 -inch color LCD display in English,Russia,Brazil and Chinese version
5. Has RS485 communication interface, supports MODBUS communication protocol.

Technical Parameter:

Model: BT600FC

Flow rate: 0.007-2280ml/min

Display mode: LCD screen

Speed control method: Touch screen control

Power consumption: ＜50W

Dispensing number: 0~9999t

Dispensing time: 0.1s~9999min

Interval time: 0.1s~9999min

Back Suction angle: 10°~720° (1° Stepping)

Speed: 0.1-600rpm

Speed resolution: 0.1rpm

Flow accuracy: ≤±0.5%

Power supply: AC220V±10%（standard） or AC110V ±10%（optional）

External Control: Start & stop, direction control, speed control( Analog control :0-5v, 0-10v, 4-20mA option )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol

Work Environment: Temperature 0-40℃, ＜80% relative humidity, no condensation

IP rating: IP31

Dimension Drawing:
212*135*240(mm)

Operation Panel:

Video:

Pump head:

YZ1515x

YZ2515x

Silicone tube parameter:

BT600FC/YZ1515x(0.007-2280ml/min)

Tube	ID(mm)	Wall thickness(mm)	OD(mm)	Speed(rpm)	Flow rate(ml/min)
13#	0.8	1.6	4	0.1-600	0.007-42
14#	1.6	1.6	4.8	0.1-600	0.027-162
19#	2.4	1.6	5.6	0.1-600	0.051-306
16#	3.1	1.6	6.3	0.1-600	0.082-492
25#	4.8	1.6	8	0.1-600	0.17-1020
17#	6.4	1.6	9.6	0.1-600	0.29-1740
18#	7.9	1.6	11.1	0.1-600	0.38-2280

BT600FC/YZ2515x(0.17-1740ml/min)

Tube	ID(mm)	Wall thickness(mm)	OD(mm)	Speed(rpm)	Flow rate(ml/min)
15#	4.8	2.4	9.6	0.1-600	0.17-1020
24#	6.4	2.4	11.2	0.1-600	0.29-1740

CR pump's silicon tube is the most commonly used material for peristaltic pump.
It provides the longest service life, and good chemical compatibility with aqueous and many organic solvents.
Its service life is about 150 hrs at 600 rpm and 825 hrs at 100 rpm.
It can usually be left running on experiments during weekends without much danger of rupture.
A fresh section of tubing should be pulled through the pump rollers before any running peristaltic pump is left unattended.
Silicone tubing can also be autoclaved a single time with a wet cycle without a significant reduction in its life.
High temperature and high pressure sterilization.

Function & characteristics:

1. Has the flow calibration function, suitable for higher precision transmission fluid.

2. A variety of work modes: transfer mode, timing model and quantitative model, timing quantitative model.

3. The user data storage function: can store 9 sets of data for the user.

4. Memory function available in case of power off and it will continue the work once the power was restarted.

5. Long-range control is available through the DB15 interface of the drive: speed control, start-stop control, direction control.

Application:

1. Culture medium Filling

2. Coffee additive Filling

3. E-liquid/nail polish/Glycerin filling

4. Coloring agent for seasoning product filling

5. Diagnostic reagent filling

6. Packing machine industrial

1、filling Electronic cigarette oil

2、filling nail polish

3、filling essential oil

4、filling perfume

Intelligent dispensing peristaltic dosing pumps

BT600FC

Flowrate

Related Application

nail polish filling peristaltic pump

filling

2018-11-23

Veterinary preparations filling with peristaltic pump

Veterinary drug

2019-01-14

Filling peristaltic pump for Fruit and Vegetable paste filling

Filling

2018-11-14

Filling peristaltic pump for Essential oil / Perfume /E-liquid / Glycerin

Filling

2018-12-30

dispensing/filling peristaltic dosing pumps - BT600FC

BT600FC/YZ1515x(0.007-2280ml/min)

BT600FC/YZ2515x(0.17-1740ml/min)

Related Products

Product

Industry

About us

Contact us