silica gel tube is also called peristaltic pump hose. It uses the platinum vulcanization process for vertical extrusion molding, which eliminates the precipitation problem often encountered in other vulcanization methods. There is a great difference between the peristaltic pump hose and the ordinary silica gel tube.
1, because the silica gel tube is always squeezed in the process of use, so it should have the characteristics of not easy deformation and high resilience. The silica gel tube used by the Leifer pump is made of the high-purity wear-resistant silica gel material, which has the characteristics of high transparency, high-temperature resistance, and 90% resilience.
2, pump transmission characteristics for precision transmission, for peristaltic pump silica gel tube diameter and wall thickness size requirements are very precise, because the size of the inner diameter directly affects the flow rate of pumping liquid, thus affecting the size of the pump flow;
3, peristaltic pump applications are wide, in some industries will be used to transfer acid and alkaline solution, so its corrosion resistance is higher than other hoses.
4, for half of the pipe, there may be magazines and black spots in the pipe wall, but the pump with silicone tube can not appear, because it will cause wear and tear in the pumping process.
5. Wear resistance test of silica gel tube. The continuous working environment of the peristaltic pump will carry out repeated friction extrusion on the tube, and the moving time will be 600 RPM.