Chuangrui Peristaltic pump in use process need regular service is to improve the working efficiency of peristaltic pump and an effective method of service life. The main components of peristaltic pump only needs simple daily lubrication service:
1.Roller should be regularly oiling ,make the roll shaft in good lubrication condition. Notes: In oiling should check the tightness of roller,if discover roller is too loose, with needle-nosed pliers to tighten; Found roller loose ,after adjusting for tightness still can not be eliminated,then you should consider the wear of the inside of the roller bearing,and can be removed to replace the bearings or replace the rollers.
2.Roller bearing every six months or so should note a grease.
*If you encounter any quality issues, please contact us in time.
*CR tube pump guarantee 7*24 hour online.
*CR manufacturer pump products with one year warranty and lifetime maintenance.
*The product pictures and models, data, functions, performance, specifications and other parameters of this website are for reference only. CR pump may improve the above contents. For details, please refer to the product and product manual. Unless otherwise stated, the data contained in this website are CR pump internal test results, and the comparisons are compared with the CR pump products.
Link: CR Peristaltic Pump
All rights reserved Baoding Chuangrui Precision Pump Co.,Ltd.
Address: 2 Floors, East Unit, Building 12, ZOL Innovation Base, Huiyang street, Baoding, Hebei, China.