Industrial DC Brushless Motor Peristaltic Pump

WT600

Flowrate

6000ml/min

Application

Ultra filtration
Circuit board manufacturing
Vitamin A & D injection
Metal surface treatment and coating process

Industrial DC Brushless Motor Peristaltic Pump  -  WT600

WT600 peristaltic pump with flowrate of 2.1~2280ml/min. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with 3 available modes: 0-5V, 0-10V and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers.


Technical Parameter:

Model: WT600


Max flow rate: 6000ml/min


Display mode: 4-LED display double mode( flow rate and speed)


​​​​Power consumption: <50W


Control method: Knob


IP rating: IP31 


Speed: 30-600rpm


Speed resolution: 1rpm


Power supply: AC220V±10%(standard) or AC110V ±10%(optional)


External Control: Start & stop, direction control, speed control( Analog control :0-5v, 0-10v, 4-20mA option )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol


Work Environment: Temperature  0-40℃, <80% relative humidity, no condensation



Dimension Drawing:
264*177*153(mm)


Operation Panel:

​​


Pump head:

YZ1515x

YZ2515x

KZ25


Silicone tube parameter:

WT600/YZ1515x(0.007-2280ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
13# 0.8 1.6 4 0.1-600 0.007-42
14#​​​​ 1.6 1.6 4.8 0.1-600 0.027-162
19# 2.4 1.6 5.6 0.1-600 0.051-306
16# 3.1 1.6 6.3 0.1-600 0.082-492
25#  4.8 1.6 8 0.1-600 0.17-1020
17# 6.4 1.6 9.6 0.1-600 0.29-1740
18# 7.9 1.6 11.1 0.1-600 0.38-2280

WT600/YZ2515x(0.17-1740ml/min)
Tube ID(mm) Wall thickness(mm) OD(mm) Speed(rpm) Flow rate(ml/min)
15# 4.8 2.4 9.6 0.1-600 0.17-1020
24#​​​​ 6.4 2.4 11.2 0.1-600 0.29-1740

WT600/KZ25(max:6000ml/min)
Tube ID(mm) Wall thickness(mm) Speed(rpm) Flow rate(ml/min)
15# 4.8 2.4 0.1-600 1800
24#​​​​ 6.4 2.4 0.1-600 3000
35# 7.9 2.4 0.1-600 4200
36# 9.6 2.4 0.1-600 6000

CR pump's silicon tube is the most commonly used material for peristaltic pump.
It provides the longest service life, and good chemical compatibility with aqueous and many organic solvents.
Its service life is about 150 hrs at 600 rpm and 825 hrs at 100 rpm.
It can usually be left running on experiments during weekends without much danger of rupture.
A fresh section of tubing should be pulled through the pump rollers before any running peristaltic pump is left unattended.
Silicone tubing can also be autoclaved a single time with a wet cycle without a significant reduction in its life.
High temperature and high pressure sterilization.

Function & characteristics:
​​​1. Applicable pump heads: YZ1515x,YZ2515x,KZ25

2. FULL SPEED button available for filling in & emptying out

3. Memory function available in case of power off

4. Good capability price rate

5. Not suitable when used in the open air

Application:

1. For liquid chromatography

2. Water treatment sampling

3. Dry grnulating machine supporting

4. Cell culture fluid filtration

5. University, research institute for laboratory use

  CR Alibaba      CR AliExpress   

All rights reserved Baoding Chuangrui Precision Pump Co.,Ltd
Address:2 Floors, East Unit, Building 12, ZOL Innovation Base, Huiyang street, Baoding, Hebei, China

Skype: ella-crpump QQ: 507183200
TOP